This is a great question, and it really depends on your setup. If the safety chain loops on your tow vehicle are spaced far apart then you will need more slack to make a tight turn than if they were closer together.
I recommend that you connect your trailer to your tow vehicle and back your trailer up into a near jack-knife position. You'll then want to use a rope to go from the safety chain attachment points of your trailer to your tow vehicle and then measure the length of rope that... view full answer...
Your 2014 Ford F-150 Raptor has keyless entry. Therefore if you are installing the Pop & Lock Custom Tailgate Lock - Power - Black, part # PAL8250, you will need to access the passenger side kick panel. The wires you would splice into are behind the kick panel. There you will find the wire harness with the pink w/red wire and pink w/black wire.
I have included the installation instructions for a more detailed explanation and an installation video link below. view full answer...
The skull trailer hitch cover, part # CR-018, plugs into a standard 4-way trailer connector at the back of your 2018 Ford F-150 Raptor. If you don't have a trailer connector you can add one using part # HM11140735. It does not include a hitch pin. Use part # PC3 for a standard pin and clip or, this is what I would do, get a locking pin like part # e98880 to protect it.
The wiring harness is 18 inches long. If it isn't long enough to reach your 4-way you can use an extension like part... view full answer...
The mounting feet on the Yakima SUPDawg Stand-Up Paddleboard Carrier part # Y04075 are fixed meaning they cannot be adjusted back and forth across the width of the carrier. The distance between them though left to right would work on even the shortest of crossbars. view full answer...
Go To Results